Neuer Isuzu M-Series Müllwagen

ISUZU Heavy-Duty Vehicle

Model: M27
Gross Vehicle Weight (GVW): 3,500 kg
Engine displacement: 2,999 cm³
Engine power: 150 HP
Fuel type: diesel
Wheelbase: 2,750 mm
Rear axle wheel configuration: twin rear wheels
Rear suspension type: parabolic suspension
Steering position: left-hand drive
Air conditioning: yes
Exhaust pipe position: right-hand side
Electrical system voltage: 24 V
Gearbox type: AMT (Automated Manual Transmission)
Gearbox model: AMT – 9-speed ISIM transmission
Power Take-Off (PTO): installed
PTO mounting location (engine / gearbox / electric clutch): gearbox
PTO model: M140045207
Outfitter connector compliant with EN 1501-01:2021 requirements
Compliance with GSR2 regulation: yes
Reversing signal compliant with EN 1501-01:2021
Emission standard: Euro VI-E GSR 2

Superstructure – Tecno Azimut 6g (aluminium)

5 m³ rear-loading mini refuse collection vehicle with articulated single-blade compaction system (aluminium tank)

Standard configuration:

Protective guard for the sliding cylinder movement area

1 × orange LED warning beacon

1 × white LED work light

2 × side-mounted LED work lights compliant with EN 1501-1:2021

Hydraulic hoses with explosion-proof technical coating

8.4” UVGT multifunction display installed in the cab for superstructure control, including:

main control button

“man on platform” safety button with associated warning lights (if platforms are installed)

MENU button

emergency STOP button

PTO engagement button

compaction reset button

PTO input method selection button

work light activation button

warning beacon activation button

left-side repeat button (if present)

compaction level adjustment button

tank up/down button (not available with optional external pull-out control panel)

hour counter display

cycle counter display

language, brightness, date and time settings

information message area

warning indicator section

rear view monitoring via infrared rear camera

Right rear control panel including:

bin lifter up/down control button

consent button for two-hand control

joystick for manual blade and slide movements

emergency release (RESCUE) button

selector switch for single / continuous / synchronized cycles

emergency STOP button

in-cab communication buzzer button

2-wheel / 4-wheel bin selector

compaction cycle start/stop button

Left rear control panel including:

emergency STOP button

in-cab communication buzzer button

Additional equipment:

Illuminated control panels

Provision for sewage discharge with under-tank valve

1 × yellow safety strut for safe maintenance with raised tank

1 × double-acting cylinder for tank lifting

2 × additional rear LED lights

Rear lights with flexible supports to absorb minor impacts

Visual hydraulic oil level indicator with integrated thermometer

Rear wheel mudguards and mud flaps

Working platforms

2 × stabilizing cylinders with automatic sequence linked to tank movement

Elastic elements between subframe and chassis for torsional stress absorption

Audible reversing warning signal

PTO connected to the vehicle gearbox

Reverse compaction cycle to facilitate waste discharge

Broom and brush housing

Shaker function for bin lifter

Powder-coated finish in TECNO WHITE

Operating and maintenance manual with spare parts catalogue

Superstructure compliant with EN 1501

BIN LIFTER

AC137 – Rear Bin Lifter

Rear-loading bin lifting device with load facilitation, manufactured from light aluminium alloy – trough type

Tilting angle greater than 45°

Handling speed compliant with EN 1501-5

Push-button control panel on the right-hand side with consent button for two-hand control

Dual-rotation system: bin lifting and subsequent overturning to prevent sewage splashing

Proportional control

Lifting capacity up to 550 kg (in accordance with EN 840-2 point 6 and EN 1501-5)

Aluminium load trough integrated with the rear body, approx. 30 litres capacity

Drain valve for residual liquids inside the bin

Colour: RAL 7016 (grey)

BIN LIFTER ACCESSORIES

AC140

Comb for DIN 1100 bins

Extended comb allowing:

simultaneous lifting of 2 bins from 120 to 360 litres (EN 840-1), or

alternatively, 1 bin from 660 to 1100 litres with flat lid

Prepared for DIN 1100 connections

Colour: RAL 7016

DIN 1100 connections for bins from 660 to 1100 litres compliant with EN 840-2/3

SUPERSTRUCTURE ACCESSORIES

Pre-hooking device with mechanical sensor

Pendant control panel with spiral cable for bin lifter movement commands

Additional orange LED warning beacon in the rear left area

Oversized rear bumpers to absorb shocks during unloading